Maybe can help you!

Showing posts with label 2. Show all posts

Tuesday, November 18, 2014

Samsung Galaxy S3 Mini Value Edition GT I8200L How to Install I8200LUBUANB2 Android 4 2 2 Jelly Bean Firmware

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S3 Mini I8200L through Odin:

Download Android 4.2.2 UBUANB2 Firmware for Galaxy S3 Mini I8200L from the above list
Download Odin 3.09
Switch off your phone and boot Galaxy S3 Mini I8200L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy S3 Mini I8200L to your computer via USB cable
In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin Lcd, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer

ReadMore..

Friday, November 7, 2014

Hard Reset Samsung Galaxy S Dous 2 s7582

Hard Reset Samsung Galaxy S Dous 2 Gt-s7582

Today We Will Tell You How To Hard Reset Your Samsung S Dous 2 Using Phones Keys . You Can Use This Method To Reset Password , Pattern Lock or Pin Lock , Reset Security Lock. Also You Can Use This Method To Full Reset Your Phone .

How To do ?

Switch Off Your Phone And Take Out Your Sim And SD Card
Press And Hold Volume Up Key + Home Key And Power Key
When Samsung Logo Release All Keys
Now You Will see a Android Robot
Press Right Option Key to Lounge Recovery Menu
Select " Wipe Data / Factory Reset " Option By Using Volume Key . Press Power Key To Confirm
Now Select " Yes ----- Delete All User Data " And Confirm
Select Reboot Option And Wait
Done !
wipe data/factory reset

ReadMore..

Tuesday, September 23, 2014

Update Galaxy Note 8 0 N5100 with XXBMF1 Jelly Bean 4 1 2 Firmware

Galaxy Note 8.0 N5100 can now be updated with the Official Android 4.1.2 XXBMF1 Jelly Bean Firmware which comes with the added stability and bug fixes. Just in case if you still haven’t got the update of this firmware, you can now manually update the same. The best part of this update is that this is the Official firmware and not the beta or custom ROM firmware. Before we proceed to check on what are the instructions to apply with this firmware, you will need to follow the list of pre requisites which we have mentioned below.

Note: Applying with this firmware won’t root / void the warranty in any manner.

Quick Pre Requisites:

Create a backup of all your data with the help of below mentioned steps. Though, you can back up the data with KIES as well, we recommend you to backup manually with the help of below mentioned steps as sometimes KIES refuses to detect the device.

SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”

From the path “Settings > Development Options > USB debugging” enable the USB Debugging Mode. Minimum charge left in your phone is 30% or else there is a risk of device getting turned off in the middle of rooting process.

Disclaimer: Follow all the instructions mentioned in this article as if there is any damage caused due to not following instructions then we shall not be held liable or responsible. Just in case if you face any issues then we will try our level best to address the same.

Assuming that you are done with all the above mentioned steps, you can now proceed to the next page where we have mentioned the detailed guide on how to apply with this firmware update.

Procedure to Update Galaxy Note 8.0 N5100 with Jellybean 4.1.2 Firmware:

Download the Jellybean 4.1.2 Firmware Package and Odin from here to your computer. Once downloaded, extract both the files in your computer and open Odin in your computer.

Open Odin in your computer. Download Mode in Galaxy Note 8.0 can be entered by first turning Off the device and then hold Volume Down Rocker Key + Menu Button and then Power ON the device. Once the device is booted and you see the Download Mode Green Robot, you can release the button combos.

Connect your device to the computer with the help of original USB cable and then you will see that the ID : COM section will turn Yellow / Green, indicating that all the drivers are installed successfully.

Click on “PDA” to select the tar file which you got from the firmware package which is the TAR File which you got after extracting the file from the first step.

Once all the file is selected, click on “Start” to start the process of firmware update. Once the firmware update process is completed which will be mentioned in the ODIN, the Galaxy S2 device will be rebooted.

For firmware update to be finished, it will take around 2-3 minutes for applying the update. Once the device is updated successfully, the device will be rebooted. As soon as you see the Language preferences or the Home Screen, you need to disconnect the device from computer and enjoy using your phone.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome Lcd, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do let us know in the comments section just in case if you face any issues in the process of firmware update in the comments section as we will try our level best to sort out the same.

ReadMore..

How To Easy Root Galaxy Tab 7 7 P6800 P6810 Running On Android 3 2 Honeycomb

Root Samsung Galaxy Tab 7.7 GT-P6800/GT-P6810 easy you can now easily eradicate your GT-P6800/GT-P6810 Galaxy Tab 7.7 running on the latest official firmware. without using a PC but only use a mobile device to install an application and follow the steps very simple.

Once you rooting Galaxy Tab 7.7 GT-P6800/GT-P6810 you really can take advantage of hardware as you want. Such as install root only apps, and can access and modify the file system, can even upgrade to a better version of Android such as Android 4.3 or Android 4.4 Jelly Bean KitKat with flashing custom ROM (if there is available and) if you have a custom recovery installed . You can follow the simple instructions to find and install a custom recovery (CWM recovery or TWRP recovery) on your device.

Disclaimer: This guide is for educational purpose only. Neither True-Android team nor any developers are responsible if your device bricked after following this tutorial. Remember, rooting void your device manufacturer warranty.

Pre Requisites:

1. Backup your device data.

2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

Hope you back up all your data and settings as mentioned above. So, its time to jump into next stage of this guide.

How To Root Galaxy Tab 7.7 GT-P6800/GT-P6810 Easily

Download Framaroot and install it (open a file explorer, navigate your download and tap on it; you can also directly open the apk from browser download section to install it). If you see a warning box then you require to check Unknown sources under Settings –> Security.
Open the app and then tap on install superuser or super SU of your choice.
You will see some rooting options. Tap on any of the available rooting method and soon youll see the success message.

To confirm if you successfully rooted your Android device or not install an app called “Root Checker” which is available for free from Google PLAY store.

That’s it! You just learn how to root Galaxy Tab 7.7 GT-P6800/GT-P6810. And, that’s too without using any computer. You can fill the comment form below to ask additional help from community.

ReadMore..

Monday, September 22, 2014

How To Android 4 4 2 KitKat Avatar ROM For AT T Galaxy Captivate SGH I897

It’s time to update your AT&T Galaxy Captivate SGH-I897 to latest and customized Android 4.4.2 KitKat with the help of custom firmware Avatar 5.0.4. It’s really good idea to have a customized AOSP based ROM instead of having pure AOSP ROM. Avatar 5.0.4 is based on latest Android 4.4.2 KitKat and build using CM11 source. The ROM mainly known for its extensive theme engine that it adopt from MIUI ROM. Its easy to download many cool looking free themes and change your phone look instantly. You can download and install custom firmware Avatar 5.0.4 on your AT&T Galaxy Captivate SGH-I897. Since, AT&T Galaxy Captivate SGH-I897 is capable enough to run Android 4.4.2 KitKat smoothly, Avatar 5.0.4 going to be a great experience for you. To learn how to flash this ROM, continue reading this guide to know how to install Android 4.4.2 KitKat based Avatar 5.0.4 custom ROM on AT&T Galaxy Captivate SGH-I897.
Related Readings:Install TWRP Recovery 2.6.3.7 on Galaxy Note 3 SM-N900 / SM-N9005 - How To Guide
Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new procstats tool details memory use, Full-Lcd Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.
As said already, this is a test build and you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a better build.
Android

Warning!
This tutorial is only for AT&T Galaxy Captivate SGH-I897. Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.
Pre Requisites:
1. Backup your device data. You can follow our ultimate backup guide
2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.
3. You already have USB Driver Installed for AT&T Galaxy Captivate SGH-I897 in your PC. [Download USB Drivers]
4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and AT&T Galaxy Captivate SGH-I897. [Guide]
5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.0 and up installed.[Guide]
If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based Avatar 5.0.4 ROM on AT&T Galaxy Captivate SGH-I897. In below tutorial we discussed the process assuming your device a non-touch recovery; you can complete the process using touch if applicable.
File Required(Download by clicking on it)

Avatar 5.0.4 For AT&T Galaxy Captivate SGH-I897 [Filename: avatar-5.0.4-NIGHTLY-20140124-captivatemtd.zip]
Google Apps [Filename: gapps-kk-20131119.zip] or any other 4.4 KitKat GApps

How to Install Android 4.4.2 KitKat based Avatar 5.0.4 ROM on AT&T Galaxy Captivate SGH-I897

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
Disconnect USB and then turn off your AT&T Galaxy Captivate SGH-I897.
Now, boot into ClockworkMod recovery by pressing and holding the Volume Up, Volume Down and Power buttons together until the Samsung logo comes up, leave all three buttons. You will see ClockworkMod recovery Lcd soon. Use Volume keys to browse between options in recovery while Power key to select an option. Alternatively try this:Recovery Mode without Key Combination.
Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next Lcd, select Backup again. Go back to main recovery menu after backup is complete.
Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next Lcd to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
Select install zip from sdcard, then select choose zip from sdcard (or /sdcard1 for external storage). Now, locate the Avatar 5.0.4 Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next Lcd. The ROM installation will begin.
Once the ROM installation process end, repeat the step 6 but choose the gapps-kk-20131119.zip file instead of ROM zip to install the Google apps package.
When installation is completed, go back to the main recovery menu and select reboot system now to reboot your AT&T Galaxy Captivate SGH-I897 and boot up into Android 4.4.2 KitKat ROM Avatar 5.0.4.
Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
Disconnect USB and then turn off your AT&T Galaxy Captivate SGH-I897.
Now, boot into TWRP recovery by pressing and holding the Volume Up, Volume Down and Power buttons together until the Samsung logo comes up, leave all three buttons. You will see TWRP recovery Lcd soon. Alternatively try this:Recovery Mode without Key Combination.
Create a Backup using TWRP Backup Option.
Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the Lcd do a Swipe on the ‘Swipe to factory reset‘ option.
Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the Avatar 5.0.4 Zip file. Then tap on Add More Zips, and add gapps-kk-20131119.zip. Now at the bottom of the Lcd, do a swipe on the Swipe to confirm flash option to begin flashing.
When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your AT&T Galaxy Captivate SGH-I897 and boot up into Android 4.4.2 KitKat ROM Avatar 5.0.4.
Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.2 KitKat firmware based custom ROM Avatar 5.0.4 is now installed and running on your AT&T Galaxy Captivate SGH-I897. If you stuck on Avatar boot logo more than 5 minutes then go back to recovery and perform Step 5 (wiping task) few more times before rebooting your device.

ReadMore..

Sunday, September 21, 2014

How To Root Easily I317MUMUCNA1 Android 4 3 Firmware Running on Galaxy Note 2 SGH I317M Canada Guide

Samsung Galaxy Note 2 SGH-I317M (Canada) recently get updated to the I317MUMUCNA1 4.3 Jelly Bean Firmware. If you yet to update the firmware, then update the same by following the above link. Hope you updated this latest firmware on your device and now you can root the same using our simple tutorial below. The below guide will help you to root UMUCNA1 4.3 Jelly Bean Firmware running on Galaxy Note 2 SGH-I317M. Continue reading the tutorial for complete guide.

After updating official firmware, your device no longer belongs to rooted device. So, after official firmware update, many of us prefer to root our device to enjoy some additional features that unrooted android device doesnt offer. With a rooted android device, you can install apps that ask root permission, flash various custom ROMs, install MODs and tweak various features. Root removes default bloatware apps that free-up lots of memory space and extend the battery life. However, once rooted, manufacturer warranty will be void. But you can regain the warranty by following proper unroot process. To know more about benefits of rooting android device, read- Complete Note on What is Rooting and Benefits of Rooting Android Phone.

So, want to root Galaxy Note 2 SGH-I317M Running I317MUMUCNA1 4.3 Jelly Bean Firmware? Continue reading this page to get all the necessary steps to successfully root your device. The root file (CF-Auto-Root) we used in this tutorial is safe and have nearly 100% success rate. Well use Odin software to flash the root file.

The tutorial is made with simple step by step guide, so that even an android newbie user can follow and successfully root his/her device. However, in this process you may loss your personal data and settings. So, we recommend you to follow all the backup instructions before proceed to rooting guide.

Warning!

This rooting tutorial is only applicable for Samsung Galaxy Note 2 SGH-I317M model (t0ltecan). So, dont try this in any other android device. Check your device model number from- Settings-About Phone.
Rooting voids your phones manufacturer warranty. However, you can get back the warranty anytime by following proper unroot process or by flashing official firmware.
This guide is for educational purpose and you should try this at your own risk. We are not responsible if your device experience a soft brick after following this tutorial.

Pre-Requisites:

Check battery percentage, charge your device to a decent level of at least 60% battery power. Your device should not turn off during installation.
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

All the above pre-requisites are very important and must be followed before proceed to installation guide. Hope you get all the above points and done as mentioned. Now, you are ready to move to the final step of this tutorial where we have arranged a step by step details guide to root Galaxy Note 2 SGH-I317M running I317MUMUCNA1 4.3 Jelly Bean firmware.

Steps to Root Galaxy Note 2 SGH-I317M Running I317MUMUCNA1 4.3 Jelly Bean through Odin:

Download CF-Auto-Root for Galaxy Note 2 I317M and extract the Zip file: CF-Auto-Root-t0ltecan-t0ltevl-sghi317m.zip
Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip
Now, Switch off your phone and boot Galaxy Note 2 I317M into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Note 2 I317M to your computer via USB cable
In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, click on the PDA button and select the CF-Auto-Root-t0ltecan-t0ltevl-sghi317m.tar.md5 file.
Finally, click on the Start button to begin the rooting process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congrats! You have completed the tutorial to root Galaxy Note 2 I317M running I317MUMUCNA1 4.3 Jelly Bean Firmware. Hope you successfully done the rooting process. If you followed everything as mentioned in the above tutorial, then your Galaxy Note 2 I317M should now rooted and you have complete control over your device. Now, install apps that ask root permission or flash various custom ROMs. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store. If you have any doubt or query about the tutorial, feel free to contact with us using the comment form below, and share your rooting experience with us.

ReadMore..

Saturday, September 20, 2014

Latest EXAM 2 4 1 2 JB Official ROM Update for Galaxy Young GT S6310

Samsung Galaxy GT-S6310 Young received a new official firmware update DXAMI2 Android Jelly Bean 4.1.2 firmware. Samsung has just released an OTA update of the firmware. S6310DXAMI2 latest firmware build version. The Galaxy Young was released in February of this year with Android 4.1.2 Jelly Bean. Samsung has not released the Android 4.2.2 version of android Jelly Bean or more for the device. If you already have the tools and the latest firmware is not updated, the latest firmware update using our simple tutorial below. You can check the latest available firmware for your device via OTA (over the air) from Settings-About Phone-Software Update.

Because Young Galaxy has been running on Android 4.1.2 Jelly Bean, you can only expect a slight bug fixes and performance enhancements with this update. So, want to update to the latest S6310 Young Galaxy DXAMI2 Jelly Bean Android 4.1.2 firmware? To install the official way, either you can go for the OTA update as mentioned above or download the firmware via Samsung Kies utility. However, most of us prefer the manual way to update the official firmware. So, in this article you will enjoy the step-by-step user guide for the Android 4.1.2 update DXAMI2 latest firmware on your Galaxy Young S6310 via Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy Young GT-S6310 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Youngdows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.1.2 Jelly Bean S6310DXAMI2 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Young GT-S6310 model.

Malaysia: S6310DXAMI2_S6310OLBAMI2_XME.zip
Vietnam: S6310DXAMI2_S6310OLBAMI2_XXV.zip

[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be Noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 S6310DXAMI2 official firmware on Galaxy Young S6310.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Young S6310 through Odin:

Download Android 4.1.2 DXAMI2 Firmware for Galaxy Young S6310 from the above list
Download Odin 3.07
Switch off your phone and boot Galaxy Young S6310 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Young S6310 to your computer via USB cable
In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
In Odin Lcd, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: S6310XXDLJ5_S6310ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congrats! you complete the tutorial for Android 4.1.2 official firmware update Jelly Bean on the GT-S6310 Galaxy young. Hope you managed to do the update process. If youve followed everything in the tutorial as mentioned above, then you should now young Galaxy runs on the latest Android 4.1.2 Jelly Bean build DXAMI2 version. You can confirm the details of the firmware update from Settings-About Phone. If you are stuck in a point or find any problems with the download link, then please do not hesitate to contact with us using the comment form below.

ReadMore..

Manual Update Samsung Galaxy S4 GT I9500 with XXUBMEA Jellybean 4 2 2 firmware

Samsung Galaxy S4 GT I9500 smartphone can now be updated with the XXUBMEA Jellybean 4.2.2 firmware. Though there is no official date on by Samsung will be rolling out this update worldwide, you can apply this update manually. Though there is no exact change log of this update, you can still go ahead and apply this update which we will be guiding you on how to apply. Before we proceed on to check on how you can apply with this release, proceed with the pre requisites first to the detailed instruction guide in the next page.

Quick Pre Requisites:

All the data in your Samsung Galaxy S4 should be backed up with the help of below mentioned steps manually and not with the KIES PC Suite.

SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”

From the path “Settings > More > Development Options > USB debugging” enable the USB Debugging Mode.

Minimum charge left in your phone is 30% or else there is a risk of device getting turned off in the middle of rooting process.

Disclaimer: Follow all the instructions mentioned in this article as if there is any damage caused due to not following instructions then we shall not be held liable or responsible. Just in case if you face any issues then we will try our level best to address the same.

Assuming that you are done with the above 3 pre requisites, you can now follow the list of instructions below for rooting your Galaxy S4.

Procedure to Update Galaxy S4 I9500 with XXUAMDL Jellybean 4.2.2 Firmware:

Download the Jellybean 4.2.2 XXUBMEA Firmware Package and Odin from here to your computer. Once downloaded, extract both the files which you have downloaded in your computer. Open Odin in your computer.

Turn Off your device so that it can be entered in the Download Mode. Download Mode in GALAXY S4 can be entered by first turning Off the device and then hold Volume Down Rocker Key + Menu Button and then Power ON the device. Once the device is booted and you see the Download Mode Green Robot, you can release the button combos.

Connect your device to the computer with the help of original USB cable and then you will see that the ID : COM section will turn Yellow / Green, indicating that all the drivers are installed successfully.

Click on “PDA” in odin to select the rooting tar file which will be there in the extracted folder to click on “Start” to start the process of rooting. Once the device is updated, the device will be rebooted automatically. It may take longer time than expected for booting the device. The whole process of firmware update might take anywhere between 10 -15 minutes depending upon various conditions.

Don’t disconnect the device from computer till you see the home Lcd in your phone or the Language selection options.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome Lcd, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do let us know in the comments section just in case if you face any issues in the process of firmware update in the comments section as we will try our level best to sort out the same. For all those who wishes to root their Samsung Galaxy S4 GT I9500 smartphones, we will be coming out with a separate tutorial which will help you root the device.

ReadMore..

Tuesday, September 16, 2014

Sagem Mobile Tool v1 0 4 2

unlock sagem Models

Download here

ReadMore..

Saturday, September 13, 2014

Samsung D780 Mic 2 solution

Samsung D780 Mic-2 solution

ReadMore..

Wednesday, September 10, 2014

How to Update Galaxy Note N5100 latest Android 8 0 Jelly Bean 4 2 2 Official Firmware XXCMK1

Hi friend I happened to lag busy so I rather late update on this blog this time I will try to guide you in practice, Samsung has just started to push Jelly Bean Android 4.2.2 firmware update with build number N5100XXCMK1 for international 3G version of the Galaxy Note the model number GT-N5100 8.0 worn. The new official update is now available as an Over-The-Air (OTA) update via Samsung Kies as well.

detailed firmware

PDA: N5100XXCMK1

CSC: N5100OLBCMK1

MODEM: N5100XXCMJ2

Version: Android 4.2.2

Creating date: 1 November 2013

Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand

Samsung Galaxy Note N5100 8.0 users who missed the OTA update notification or can not access the update via Samsung Kies, can follow the step-by-step guide to install the update manually.

Pre-requisites

Install USB Drivers for Samsung Galaxy Note 8.0 on the computer.
Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
Make a backup of all your important data before following the guide.
The Galaxy Note 8.0 should be factory unlocked and not locked to any particular carrier.
Ensure the battery of the phone is charged more than 80 percent.
The Android 4.2.2 XXCMK1 Jelly Bean firmware is compatible only with the Samsung Galaxy Note 8.0 with model number GT-N5100. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 8.0 by navigating to Settings >> About Phone.

File Required

1. Android 4.2.2 XXCMK1 Jelly Bean Firmware (Alternative Link) for Galaxy Note 8.0 N5100

2. Odin 3.07

Steps to Update Galaxy Note 8.0 N5100 with Android 4.2.2 XXCMK1 Jelly Bean Firmware

Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Switch off the Galaxy Note 8.0.
Boot the device into Download Mode by pressing and holding Volume Down, Homeand Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Run Odin on the computer as an Administrator.
Connect the Galaxy Note 8.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

7. Select the following files in Odin from extracted N5100XXCMK1 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

8. In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.

9. Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the installation process.

10. Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Note 8.0 N5100 should be now updated with official Android 4.2.2 XXCMK1 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 8.0 N5100 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

ReadMore..

Sunday, September 7, 2014

How To Update Galaxy S4 mini I9195 To Android 4 4 2 KitKat via CM11 Nightly

Now you can update S4 Galaxy Mini I9195 to the latest and customized Android 4.4.2 KitKat. Google has just introduced Android 4.4.2 Nexus KitKat many models but builds are not much customized. The CyanogenMod team has just introduced Android 4.4.2 CM11-based KitKat Mini build for I9195 Galaxy S4. You can download and install a custom firmware on Galaxy S4 CM11 Mini I9195. Because, I9195 Galaxy S4 Mini powerful enough to smoothly run Android 4.4.2 KitKat, CM11 will be a great experience for you. By building a night you will receive daily updates and bugs fixed faster and features introduced regularly. To learn how to flash this ROM, continue reading this guide to find out how to install Android 4.4.2 custom ROM based on the KitKat CM11 Mini I9195 Galaxy S4.

Most of the Android 4.4.2 KitKat nice features that you will enjoy is the Screen Recording, Click to Pay (Google Wallet to all people), NFC emulation for non-NFC devices, 14% use less memory, cloud printing from the gallery, is the Google Home new Launcher, core System process use, efficient and responsive applications on all devices, the memory usage of all the new tool procstats details, Immersive full-screen mode, the changes in the resolution for smooth media playback, phone dialer gets local businesses detection, Quickoffice redesigned and much more.

As said already, this is a test build and you should expect some bugs in it. All bugs and problems are expected to remain as the construction progress toward a better build.

Pre Requisites:

1. Backup your device data.

2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy S4 mini I9195 in your PC. Download USB Drivers

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S4 mini I9195.

5. Your device have latest ClockworkMod Recovery Installed.

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based CM11 ROM on Galaxy S4 mini I9195.

File Required(Download by clicking on it)

CM11 For Galaxy S4 mini I9195 [Filename: cm-11-20131217-NIGHTLY-serranoltexx.zip]
Google Apps [Filename: gapps-kk-20131119.zip]

Warning!

This tutorial is only for Galaxy S4 mini I9195. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

How to Install Android 4.4.2 KitKat based CM11 ROM on Galaxy S4 mini I9195

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device.Important: Don’t extract any files.
Disconnect USB and then turn off your Galaxy S4 mini I9195.
Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power to select an option.
Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advanceoption to perform Dalvik cache wiping.
Select install zip from sdcard, then select choose zip from sdcard. Now, locate the CM11 Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
Once the ROM installation process end, repeat the step 6 but choose the gapps-kk-20131119.zip file instead of ROM zip to install the Google apps package.
When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy S4 mini I9195 and boot up into Android 4.4.2 KitKat ROM CM11.
Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.2 KitKat firmware based custom ROM CM11 is now installed and running on your Galaxy S4 mini I9195.

ReadMore..

Saturday, September 6, 2014

How To Install XXMK1 Android 2 3 6 GB Firmware on Galaxy Y S5360 Guide

Samsung rolled out XXMK1 Android 2.3.6 Gingerbread official firmware update for Galaxy Y GT-S5360. The firmware update rolled out in various countries including Kazakhstan and Russia; and can also be downloaded for a manual update. You can also update your device to this firmware through KIES or via OTA update. Since the device comes with Android 2.3.6 Gingerbread out of the box, this new firmware update only brings bug fixes and performance tweaks. Continue reading this guide to learn how to get official stock S5360XXMK1 Android 2.3.6 Gingerbread firmware running on Galaxy Y GT-S5360.

Warning: This tutorial is only for Galaxy Y GT-S5360. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

1. Backup your device data. You can follow our ultimate backup guide.

2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy Y GT-S5360 in your PC. Download USB Drivers

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Y GT-S5360. Guide

How To Update Galaxy Y GT-S5360 via OTA

First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
Now, go to Android app drawer and then select Settings.
Then locate About Device and tap on it.
Next select Software update from About device screen.
Then tap on Update option.
You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
Soon your device will reboot to complete the installation process.

If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy Y GT-S5360 via Kies

Make sure you have stable internet connection on your computer.
Now download and install Samsung Kies on your computer.
Turn on your device (if it off) and then connect it to computer with USB cable.
Run Samsung Kies and wait for it to detect your device.
You should see a New Firmware Upgrade is available at Samsung Kies home screen.
Press the Firmware Upgrade button to proceed.
Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.

Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

[Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]

S5360XXMK1 Android 2.3.6 Gingerbread Firmware Downloads

Kazakhstan (Kcell): S5360XXMK1 S5360KCLLL1_KCL.zip

Russia: S5360XXMK1 S5360SERMI1_SER.zip

How To Install S5360XXMK1 Android 2.3.6 Gingerbread On Galaxy Y GT-S5360 Manually

Download Odin v3.09.
Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Galaxy Y GT-S5360 in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Click the AP Button, and select that .tar.md5 file that you get in Step 2. If you are using old Odin then add the file to PDA button.
In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, your Galaxy Y GT-S5360 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Congrats! You just updated your Galaxy Y GT-S5360 to Android 2.3.6 Gingerbread firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy Y GT-S5360

If Galaxy Y GT-S5360 stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:

Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.

Please note, performing wiping task will erase your device internal memory data and not external SD card data.

That’s it! Let us know about your latest Android 2.3.6 Gingerbread experience.

ReadMore..

Friday, September 5, 2014

Motorola Service Software 3 5 2 Victor FULL

Motorola Service Software 3.5.2 victor Full
Unlock Motorola
P2K An other

how to
1-install hdd32 and setup_3.5.2_full
2-execute startnt.cmd and Mot.reg
3-copy 1343523163.key to C:Program FilesVictorGSM.netMotorola 3.5.2 Full
4-Enjoy Unlocking free
Download here

ReadMore..

Thursday, September 4, 2014

how to hand reset htc touch 2 solution

1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.

2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:

3. Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset

ReadMore..

Tuesday, September 2, 2014

MY Solution 2

MY Solution-2 Download

ReadMore..

Thursday, August 28, 2014

Android 4 4 2 update for Nexus 4 Nexus 5 Nexus 7 and Nexus 10

its not just been a complete week since we heard rumors of Google rolling out the Android 4.4.1 update to multiple nexus devices, today Google has secretly started rolling out a new Android 4.4.2 update for the Nexus devices. Google has yet to make an official announcement on this but we hope to from Google very soon.

With two consecutive updates being lined up for the Nexus devices, it seems some users might skip the Android 4.4.1 update and get directly updated to Android 4.4.2. it might be strange to see an update within less than a week after the android 4.4.2 update, but it seems google might have found a flaw in the previous update, which is why Google has swiftly rolled out the new Android 4.4.2 update to fix any issues in the previous firmware update.

As of now there has been no official change log but sprint seems to have confirmed the change log details for the new Android 4.4.2 update.

Enhancements/Fixes

- Fix for clearing the VM Indicator
- Fix for delivery of the VM Indicator
- Various additional software fixes
- Security enhancements

The Android 4.4.2 OTA update has already begun rolling out to supported nexus devices. For those who cant wait, you can manually flash the new update on your nexus device. Thanks to Androidpolice, Below are the Android 4.4.2 download links for your respective nexus devices.

Android 4.4.2 Download Links

T Mobile LG G2 D801 Using Android 4 4 2 KitKat PAC man ROM How To Install Guide

T-Mobile LG G2 D801 can be updated to latest Android 4.4.2 KitKat. The upgrade is possible with the help of custom ROM PAC-man. The development team of PAC-man ROM finally introduced Android 4.4.2 KitKat based PAC-man ROM for T-Mobile LG G2 D801. Which means, you can download and install custom firmware PAC-man to update your T-Mobile LG G2 D801 to latest Android 4.4.2 KitKat. T-Mobile LG G2 D801 comes with good hardware spec, hence is capable to run PAC-man smoothly. PAC-man ROM consist various features of Paranoid Android, AOKP and CyanogenMod. The link Im sharing is PAC-man nightly build. The good thing about nightly build is, you will receive update daily and bugs are fixed faster as well as new feature introduced regularly. Continue reading this guide to know how to install Android 4.4.2 KitKat based PAC-man custom ROM on T-Mobile LG G2 D801.
PAC-man comes with various useful customization. Since, PAC-man is based on Android 4.4.2 KitKat, you may like to know whats new on it. Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new procstats tool details memory use, Full-screen Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.
Please note, not all Android 4.4.2 KitKat feature yet ported to PAC-man ROM.

Another thing you should note, this is nightly build, hence expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable PAC-man build.
Warning!
This tutorial is only for T-Mobile LG G2 D801. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.
Pre Requisites:
1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.
2. Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.
3. You must have USB Driver Installed for T-Mobile LG G2 D801 in your PC. [Download USB Drivers]
4. Make sure USB Debugging is enabled otherwise its wont be possible to transfer file between PC and T-Mobile LG G2 D801. [Guide].
5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]
If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based PAC-man ROM on T-Mobile LG G2 D801.
File Required(Download by clicking on it)

PAC-man For T-Mobile LG G2 D801 [Filename: pac_d801-nightly-20140514.zip]
Google Apps [Filename: pa_gapps-stock-4.4.2-20140207-signed.zip]

How to Install Android 4.4.2 KitKat based PAC-man ROM on T-Mobile LG G2 D801

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
Disconnect USB and then turn off your T-Mobile LG G2 D801.
Now, boot into recovery mode. To do so, press and hold Volume down & Power, when the LG logo appears release and press them again, then press the Power button three times! In recovery use Volume Keys to navigate between option and Power button to select an option. Alternatively try this: Recovery Mode without Key Combination.
Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
Select install zip from sdcard, then select choose zip from sdcard. Now, locate the PAC-man Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
Once the ROM installation process end, repeat the step 6 but choose the pa_gapps-stock-4.4.2-20140207-signed.zip file instead of ROM zip to install the Google apps package.
When installation is completed, go back to the main recovery menu and select reboot system now to reboot your T-Mobile LG G2 D801 and boot up into Android 4.4.2 KitKat ROM PAC-man.
Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
Disconnect USB and then turn off your T-Mobile LG G2 D801.
Now, boot into recovery mode. To do so, press and hold Volume down & Power, when the LG logo appears release and press them again, then press the Power button three times! Alternatively try this: Recovery Mode without Key Combination.
Create a Backup using TWRP Backup Option.
Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the PAC-man Zip file. Then tap on Add More Zips, and add pa_gapps-stock-4.4.2-20140207-signed.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your T-Mobile LG G2 D801 and boot up into Android 4.4.2 KitKat ROM PAC-man.
Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.2 KitKat firmware based custom ROM PAC-man is now running on your T-Mobile LG G2 D801. Now explore the latest Android 4.4.2 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

ReadMore..

Tuesday, August 26, 2014

How To Root N7100XXUEML2 Galaxy Note 2 N7100 Android 4 3 JB Firmware

Samsung Galaxy Note GT-N7100 2 was recently updated to Android 4.3 Jelly Bean. If you have not updated then visit here: Install Android 4.3 XXUEML2 JB Firmware on Galaxy Note 2 N7100 - How To Guide. So, if you update the devices latest firmware update then the next thing youre looking for the root of Android 4.3 Jelly Bean N7100XXUEML2 firmware running on the Samsung Galaxy Note GT-N7100 2. In this page we will help you to eradicate XXUEML2 Android 4.3 Jelly Bean firmware. Continue reading this tutorial.

Once rooted, you can access the file system, can overclock / underclock the CPU and GPU, can use the MOD and their various applications that require root access. However, once you root your device, the manufacturers warranty will be void. You can only get back to the proper follow unroot process.

Pre Requisites:

Though root don’t erase internal memory data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation.

1. Backup your device data. You can follow our ultimate backup guide.

2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy Note 2 GT-N7100 in your PC. Download USB Drivers

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Note 2 GT-N7100. Guide

How To Root N7100XXUEML2 Android 4.3 Jelly Bean On Galaxy Note 2 GT-N7100

Download Odin v3.09 and root file for N7100XXUEML2.
Extract CF-Root zip file that you downloaded earlier from above link, you will get a .tar.md5 file.
Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Galaxy Note 2 GT-N7100 in Download Mode by pressing and holding down the Volume Down,Home and Power button together. A warning screen will come up; press Volume Up button to enter Download Mode.
Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Click the AP Button, and select that CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 file that you get in Step 2.
In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, your Galaxy Note 2 GT-N7100 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Congrats! You just rooted Samsung Galaxy Note 2 GT-N7100 running on N7100XXUEML2 Android 4.3 Jelly Bean firmware. To confirm if you successfully rooted your Android device or not install an app called “Root Checker” which is available for free from Google PLAY store.

ReadMore..

Tuesday, November 18, 2014

Friday, November 7, 2014

Hard Reset Samsung Galaxy S Dous 2 Gt-s7582

Tuesday, September 23, 2014

Monday, September 22, 2014

How to Install Android 4.4.2 KitKat based Avatar 5.0.4 ROM on AT&T Galaxy Captivate SGH-I897

Sunday, September 21, 2014

Warning!

Pre-Requisites:

Steps to Root Galaxy Note 2 SGH-I317M Running I317MUMUCNA1 4.3 Jelly Bean through Odin:

Saturday, September 20, 2014

Tuesday, September 16, 2014

Saturday, September 13, 2014

Wednesday, September 10, 2014

Sunday, September 7, 2014

Saturday, September 6, 2014

How To Update Galaxy Y GT-S5360 via OTA

How To Update Galaxy Y GT-S5360 via Kies

S5360XXMK1 Android 2.3.6 Gingerbread Firmware Downloads

Fix Boot Loop Issue On Galaxy Y GT-S5360

Friday, September 5, 2014

Thursday, September 4, 2014

Tuesday, September 2, 2014

Thursday, August 28, 2014

Enhancements/Fixes

Android 4.4.2 Download Links

Nexus 4

Nexus 5

2012 Nexus 7 Wi-Fi

2012 Nexus 7 3G

2013 Nexus 7 Wi-Fi

2013 Nexus 7 LTE

Nexus 10

Tuesday, August 26, 2014

How To Root N7100XXUEML2 Android 4.3 Jelly Bean On Galaxy Note 2 GT-N7100