Maybe can help you!

Showing posts with label bean. Show all posts

Tuesday, November 18, 2014

Samsung Galaxy S3 Mini Value Edition GT I8200L How to Install I8200LUBUANB2 Android 4 2 2 Jelly Bean Firmware

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S3 Mini I8200L through Odin:

Download Android 4.2.2 UBUANB2 Firmware for Galaxy S3 Mini I8200L from the above list
Download Odin 3.09
Switch off your phone and boot Galaxy S3 Mini I8200L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy S3 Mini I8200L to your computer via USB cable
In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin Lcd, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer

Tuesday, October 14, 2014

How to Update Samsung Infuse 4G i997 to Jelly Bean 4 1 via Cyanogenmod 10

Follow this guide to install Jelly Bean 4.1.1 via Cyanogenmod 10 on Samsung Infuse 4G i997.
Disclaimer : The Procedure described in this article are risky & can cause damage to your device. You should not try to attempt this if you are not aware of these things. Please follow this guide completely at your own risk. If any damage happened to your device while following this tutorial, neither we nor developer should be held responsible for the same.

Please note that, this update of Cyanogenmod 10 is applicable only for Samsung Infuse 4G bearing model number I997. DON’T try it on any other device, it may cause damage to your phone..
Pre-Requisites before installing Cyanogenmod 10 :
Charge your device upto 60% battery level so that installation procedure won’t be interrupted.
You will have to wipe all the data (excluding SD card) before installing this custom ROM update. Therefore it is highly recommended to Backup all your data from phone memory which includes contacts, messages (SMS/MMS), call logs, Internet APNs etc.
Enable USB Debugging option in your phone which can be found out here : “Settings->Applications->Development->USB Debugging”
Procedure to Update AT&T Samsung Infuse 4G I997 with Cyanogenmod 10 :
Before proceeding to the actual installation procedure, ensure that your device is running Android 4.0 (ICS) ROM & has custom recovery installed in it. Please don’t proceed further if your phone doesn’t meet above 2 requirements.
Download latest Cyanogenmod 10 package from the official development page (link is mentioned below) :

Infuse 4G Cyanogenmod 10
(Optional) Download Google Add-on Apps (Gmail, Maps, GTalk, Play Store etc.) which need to be flashed manually since they are not present in the ROM by default.
Google Apps (Jelly Bean).
After downloading CM10 & Google Apps, connect your device to PC. Enable mass storage mode on it. Now copy Cboth the files to your device’s SD card.
Disconnect it from computer. Boot in recovery mode on your phone. To do so, switch off the phone completely. Press & hold Volume Up + Volume Down + Power Key together until recovery mode appears (you may release power button after Samsung logo but keep holding other two).
Take a nandroid backup of your current ROM so that it can be restored back (in case if anything goes wrong). To backup your current ROM, select Backup and Restore option from the recovery mode & on next Lcd, select backup. Now It will make a nandroid backup of your whole system (excluding SD card). Wait for the backup process to get finished.
Select wipe data/factory reset & wipe cache partition to wipe all the data & caches from the phone memory respectively.
Now Select “install zip from sdcard” followed by “choose zip from sdcard“. Navigate the ROM file (which you’ve transferred earlier) Select it & press on ‘Yes‘ to continue. ROM installation process will start.
Wait for the ROM to get installed. After ROM gets successfully installed, your phone will land in the recovery mode again.
(Optional) The same procedure you have to do for installation of Google Apps (Don’t wipe the data again). After you finished installation of Gapps, press back button to go to main menu of CWM.
Select reboot system now from the recovery mode to Restart the phone.
Congratulations !! You’ve successfully updated your Samsung Infuse 4G with the Jelly Bean based custom ROM (Cyanogenmod 10). Keep visiting the official development page for the latest updates & if you have any issue regarding this procedure, comment it below, we will try our best to sort out the same.
Tip: In case if you want to revert back to your previous ROM , enter into recovery mode (mentioned above), from the main menu, select Backup and Restore option & on next Lcd, select restore & choose your latest backup to restore.

ReadMore..

Tuesday, September 23, 2014

Update Galaxy Note 8 0 N5100 with XXBMF1 Jelly Bean 4 1 2 Firmware

Galaxy Note 8.0 N5100 can now be updated with the Official Android 4.1.2 XXBMF1 Jelly Bean Firmware which comes with the added stability and bug fixes. Just in case if you still haven’t got the update of this firmware, you can now manually update the same. The best part of this update is that this is the Official firmware and not the beta or custom ROM firmware. Before we proceed to check on what are the instructions to apply with this firmware, you will need to follow the list of pre requisites which we have mentioned below.

Note: Applying with this firmware won’t root / void the warranty in any manner.

Quick Pre Requisites:

Create a backup of all your data with the help of below mentioned steps. Though, you can back up the data with KIES as well, we recommend you to backup manually with the help of below mentioned steps as sometimes KIES refuses to detect the device.

SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”

From the path “Settings > Development Options > USB debugging” enable the USB Debugging Mode. Minimum charge left in your phone is 30% or else there is a risk of device getting turned off in the middle of rooting process.

Disclaimer: Follow all the instructions mentioned in this article as if there is any damage caused due to not following instructions then we shall not be held liable or responsible. Just in case if you face any issues then we will try our level best to address the same.

Assuming that you are done with all the above mentioned steps, you can now proceed to the next page where we have mentioned the detailed guide on how to apply with this firmware update.

Procedure to Update Galaxy Note 8.0 N5100 with Jellybean 4.1.2 Firmware:

Download the Jellybean 4.1.2 Firmware Package and Odin from here to your computer. Once downloaded, extract both the files in your computer and open Odin in your computer.

Open Odin in your computer. Download Mode in Galaxy Note 8.0 can be entered by first turning Off the device and then hold Volume Down Rocker Key + Menu Button and then Power ON the device. Once the device is booted and you see the Download Mode Green Robot, you can release the button combos.

Connect your device to the computer with the help of original USB cable and then you will see that the ID : COM section will turn Yellow / Green, indicating that all the drivers are installed successfully.

Click on “PDA” to select the tar file which you got from the firmware package which is the TAR File which you got after extracting the file from the first step.

Once all the file is selected, click on “Start” to start the process of firmware update. Once the firmware update process is completed which will be mentioned in the ODIN, the Galaxy S2 device will be rebooted.

For firmware update to be finished, it will take around 2-3 minutes for applying the update. Once the device is updated successfully, the device will be rebooted. As soon as you see the Language preferences or the Home Screen, you need to disconnect the device from computer and enjoy using your phone.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome Lcd, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Do let us know in the comments section just in case if you face any issues in the process of firmware update in the comments section as we will try our level best to sort out the same.

ReadMore..

Thursday, September 18, 2014

How To easy Root Jiayu G4 Running On Android 4 1 Jelly Bean

This time I will discuss the root, namely Root Jiayu G4 easily without using a PC but just using your mobile device. Yes! Now you can root your Jiayu G4 that is running on the latest official firmware by installing the app and follow the simple steps below. You do not need a PC or your computer. By rooting your device you can enjoy a wide range of additional benefits that the stock you can not deliver.

Once you root Jiayu G4 well you can use the hardware the way you want. This Android-powered device comes with an impressive portfolio of hardware that you can use at full potential after you root Jiayu G4. You can overclock, can install root only apps, can access and modify the file system, can even upgrade to a better version of Android such as Android 4.3 or Android 4.4 Jelly Bean KitKat by flashing a custom ROM (if there is available and) if you have custom recovery installed. You can follow the simple instructions to find and install a custom recovery (CWM recovery or TWRP recovery) on your device. See also: Benefits of Rooting Android Devices

Disclaimer: This guide is for educational purpose only. Neither True-Android team nor any developers are responsible if your device bricked after following this tutorial. Remember, rooting void your device manufacturer warranty.

Pre Requisites:

1. Backup your device data.
2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.
Hope you back up all your data and settings as mentioned above. So, its time to jump into next stage of this guide.
How To root Jiayu G4 Easily

Step 1: Download Framaroot and install it (open a file explorer, navigate your download and tap on it; you can also directly open the apk from browser download section to install it). If you see a warning box then you require to check Unknown sources under Settings –> Security.
Step 2: Open the app and then tap on install superuser or super SU of your choice.
Step 3: You will see some rooting options. Tap on any of the available rooting method and soon youll see the success.

To confirm if you successfully rooted your Android device or not install an app called “Root Checker” which is available for free from Google PLAY store

That’s it! You just learn how to root Jiayu G4. And, that’s too without using any computer. You can fill the comment form below to ask additional help from community.

ReadMore..

Wednesday, September 10, 2014

How to Update Galaxy Note N5100 latest Android 8 0 Jelly Bean 4 2 2 Official Firmware XXCMK1

Hi friend I happened to lag busy so I rather late update on this blog this time I will try to guide you in practice, Samsung has just started to push Jelly Bean Android 4.2.2 firmware update with build number N5100XXCMK1 for international 3G version of the Galaxy Note the model number GT-N5100 8.0 worn. The new official update is now available as an Over-The-Air (OTA) update via Samsung Kies as well.

detailed firmware

PDA: N5100XXCMK1

CSC: N5100OLBCMK1

MODEM: N5100XXCMJ2

Version: Android 4.2.2

Creating date: 1 November 2013

Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand

Samsung Galaxy Note N5100 8.0 users who missed the OTA update notification or can not access the update via Samsung Kies, can follow the step-by-step guide to install the update manually.

Pre-requisites

Install USB Drivers for Samsung Galaxy Note 8.0 on the computer.
Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
Make a backup of all your important data before following the guide.
The Galaxy Note 8.0 should be factory unlocked and not locked to any particular carrier.
Ensure the battery of the phone is charged more than 80 percent.
The Android 4.2.2 XXCMK1 Jelly Bean firmware is compatible only with the Samsung Galaxy Note 8.0 with model number GT-N5100. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 8.0 by navigating to Settings >> About Phone.

File Required

1. Android 4.2.2 XXCMK1 Jelly Bean Firmware (Alternative Link) for Galaxy Note 8.0 N5100

2. Odin 3.07

Steps to Update Galaxy Note 8.0 N5100 with Android 4.2.2 XXCMK1 Jelly Bean Firmware

Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Switch off the Galaxy Note 8.0.
Boot the device into Download Mode by pressing and holding Volume Down, Homeand Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Run Odin on the computer as an Administrator.
Connect the Galaxy Note 8.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

7. Select the following files in Odin from extracted N5100XXCMK1 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

8. In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.

9. Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the installation process.

10. Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Note 8.0 N5100 should be now updated with official Android 4.2.2 XXCMK1 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 8.0 N5100 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

ReadMore..

Monday, August 18, 2014

Update Galaxy Grand Duos I9082 with Android 4 2 2 XXUBNA5 Jelly Bean Official Firmware

How to Update Galaxy Grand Duos I9082 with Android 4.2.2 XXUBNA5 Jelly Bean Official Firmware-Samsung Galaxy Grand with Dual SIM card slot also known as Galaxy Grand Duos (GT-I9082) has just received the latest Android 4.2.2 Jelly Bean update with firmware build number I9082XXUBNA5. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details

PDA: I9082XXUBNA5
CSC: I9082OJVBNA2
MODEM: I9082XXUBNA2
Version: Android 4.2.2
Build date: Jan 22, 2014
Regions: Iraq, Algeria, Afghanistan, Egypt, Iran, Kenya, Morocco, Pakistan, Saudi Arabia, South Africa, Turkey, Tunisia, United Arab Emirates

Samsung Galaxy Grand Duos I9082 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.

Pre-requisites

1. Install USB Drivers for Samsung Galaxy Grand Duos on the computer.

2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. The Galaxy Grand Duos should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the phone is charged more than 80 percent.

6. The Android 4.2.2 XXUBNA5 Jelly Bean firmware is compatible only with the Galaxy Grand Duos (GT-I9082). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Grand Duos by navigating to Settings >> About Phone.

Files Required

1. Android 4.2.2 XXUBNA5 Jelly Bean Firmware (Mirror Link) for Galaxy Grand Duos I9082

2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Grand Duos I9082 with Android 4.2.2 XXUBNA5 Jelly Bean Firmware

Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Switch off the Galaxy Grand Duos.
Boot the device into Download Mode by pressing and holding Volume Down, Homeand Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Run Odin on the computer as an Administrator.
Connect the Galaxy Grand Duos to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Select the following files in Odin from extracted I9082XXUBNA5 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the installation process.
Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Grand Duos I9082 should be now updated with Android 4.2.2 XXUBNA5 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Grand Duos I9082 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

ReadMore..