Wednesday, September 10, 2014

How to Update Galaxy Note N5100 latest Android 8 0 Jelly Bean 4 2 2 Official Firmware XXCMK1

Hi friend I happened to lag busy so I rather late update on this blog this time I will try to guide you in practice, Samsung has just started to push Jelly Bean Android 4.2.2 firmware update with build number N5100XXCMK1 for international 3G version of the Galaxy Note the model number GT-N5100 8.0 worn. The new official update is now available as an Over-The-Air (OTA) update via Samsung Kies as well.

detailed firmware
PDA: N5100XXCMK1
CSC: N5100OLBCMK1
MODEM: N5100XXCMJ2
Version: Android 4.2.2
Creating date: 1 November 2013
Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand



Samsung Galaxy Note N5100 8.0 users who missed the OTA update notification or can not access the update via Samsung Kies, can follow the step-by-step guide to install the update manually.


Pre-requisites
  • Install USB Drivers for Samsung Galaxy Note 8.0 on the computer.
  • Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
  • Make a backup of all your important data before following the guide.
  • The Galaxy Note 8.0 should be factory unlocked and not locked to any particular carrier.
  • Ensure the battery of the phone is charged more than 80 percent.
  • The Android 4.2.2 XXCMK1 Jelly Bean firmware is compatible only with the Samsung Galaxy Note 8.0 with model number GT-N5100. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 8.0 by navigating to Settings >> About Phone.

File Required
1. Android 4.2.2 XXCMK1 Jelly Bean Firmware (Alternative Link) for Galaxy Note 8.0 N5100

Steps to Update Galaxy Note 8.0 N5100 with Android 4.2.2 XXCMK1 Jelly Bean Firmware

  1. Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
  2. Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
  3. Switch off the Galaxy Note 8.0.
  4. Boot the device into Download Mode by pressing and holding Volume Down, Homeand Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
  5. Run Odin on the computer as an Administrator.
  6. Connect the Galaxy Note 8.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

     7. Select the following files in Odin from extracted N5100XXCMK1 firmware folder:

  • Click the PDA button and select the .tar.md5 file.
  • Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
  • Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
  • Click the PIT button and select the .pit file. Ignore if there is no such file.

    8. In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox       is chosen only if a .pit file was chosen in the previous step.
    9. Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the     installation process.
   10. Once the installation process is completed, your phone will restart and soon you will see a PASS             message with green background in the left-most box at the very top of the Odin. You can now unplug the     USB cable to disconnect your device from the computer.

Samsung Galaxy Note 8.0 N5100 should be now updated with official Android 4.2.2 XXCMK1 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 8.0 N5100 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Posted by at
Labels: , , , , , , , , , , , , , , , ,

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)