Showing posts with label jellybean. Show all posts
Showing posts with label jellybean. Show all posts
Thursday, September 25, 2014
JellyBean 4 1 0 For Galaxy Y
Want to get Android 4.1 Jelly Bean taste on your Galaxy Y? Yes, of course you can. Find out details after the jump!Thanks to S5360 custom ROM for Android 4.1 Jelly bean, now you can update your Galaxy Y to Android 4.1. In this post you will learn how to update your Samsung Galaxy Y to Android 4.1 Jelly Bean using S5360 custom ROM. Before you proceed, you will need to have fulfilled following requirements:
Step 2) Connect your Galaxy Y USB to your computer using the USB cable.
Step 3) Copy the downloaded file to your SD card.
Step 4) Turn off your phone and then turn it in again in the recovery mode by pressing and holding the Volume UP + Home Button + Power Key buttons.
Step 5) Now you will see exclamation mark on your phone Lcd. Again hold your volume up and power buttons. Now your Galaxy Y is in recovery mode.
Step 6) Once your smartphone is in ClockworkMod recovery, you are ready to perform a Nandroid backup of your existing ROM. For that you will need to select Backup and Restore option followed by selecting Backup again in next windows. Once the backup is completed, you are ready to go back to main recovery menu.
Step 7) Now you will need to wipe the previous ROM first. For that select Wipe data/factory reset option and select Yes to confirm the action.
Step 7) Now select Install zip from sdcard and then select choose zip from sdcard.
Step 8) Navigate to Custom ROM file we have just uploaded to SD card in step 3 and select it using power button. Confirm the installation on the next Lcd and the installation procedure should start now.
Step 9) Once installation is completed, go back to main recovery menu and select Reboot System Now.
Recommended: Before rebooting your phone from CWM Recovery, go to CWM Recovery main menu and select Wipe Data Cache under Advance option to perform the Data cache wiping.
- You have to install your Galaxy Y USB Drivers on your PC.
- You need to enable USB debugging mode which is deactivated by default.
- You smartphone should have minimum 80% charge remaining.
- Your Galaxy Y should be Rooted.
- This guide is only meant for Galaxy Y GT-S5360, dont try it on other variants of Galaxy Y. You can check your Galaxy Y version in Settings –> About phone.
- Last but not least, backup your important data like Call logs, SMS and other data in stored in phone memory so in case if anything goes wrong, your data is not hurt.
How to Install Android 4.1 Jelly Bean Custom ROM on Galaxy Y
Step 1) DOWNLOAD Android 4.1 Jelly Bean Custom ROM for Galaxy Y.Step 2) Connect your Galaxy Y USB to your computer using the USB cable.
Step 3) Copy the downloaded file to your SD card.
Step 4) Turn off your phone and then turn it in again in the recovery mode by pressing and holding the Volume UP + Home Button + Power Key buttons.
Step 5) Now you will see exclamation mark on your phone Lcd. Again hold your volume up and power buttons. Now your Galaxy Y is in recovery mode.
Step 6) Once your smartphone is in ClockworkMod recovery, you are ready to perform a Nandroid backup of your existing ROM. For that you will need to select Backup and Restore option followed by selecting Backup again in next windows. Once the backup is completed, you are ready to go back to main recovery menu.
Step 7) Now you will need to wipe the previous ROM first. For that select Wipe data/factory reset option and select Yes to confirm the action.
Step 7) Now select Install zip from sdcard and then select choose zip from sdcard.
Step 8) Navigate to Custom ROM file we have just uploaded to SD card in step 3 and select it using power button. Confirm the installation on the next Lcd and the installation procedure should start now.
Step 9) Once installation is completed, go back to main recovery menu and select Reboot System Now.
Recommended: Before rebooting your phone from CWM Recovery, go to CWM Recovery main menu and select Wipe Data Cache under Advance option to perform the Data cache wiping.
Saturday, September 20, 2014
Manual Update Samsung Galaxy S4 GT I9500 with XXUBMEA Jellybean 4 2 2 firmware
Samsung Galaxy S4 GT I9500 smartphone can now be updated with the XXUBMEA Jellybean 4.2.2 firmware. Though there is no official date on by Samsung will be rolling out this update worldwide, you can apply this update manually. Though there is no exact change log of this update, you can still go ahead and apply this update which we will be guiding you on how to apply. Before we proceed on to check on how you can apply with this release, proceed with the pre requisites first to the detailed instruction guide in the next page.
Quick Pre Requisites:
- All the data in your Samsung Galaxy S4 should be backed up with the help of below mentioned steps manually and not with the KIES PC Suite.
SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”
- From the path “Settings > More > Development Options > USB debugging” enable the USB Debugging Mode.
- Minimum charge left in your phone is 30% or else there is a risk of device getting turned off in the middle of rooting process.
Disclaimer: Follow all the instructions mentioned in this article as if there is any damage caused due to not following instructions then we shall not be held liable or responsible. Just in case if you face any issues then we will try our level best to address the same.
Assuming that you are done with the above 3 pre requisites, you can now follow the list of instructions below for rooting your Galaxy S4.
Procedure to Update Galaxy S4 I9500 with XXUAMDL Jellybean 4.2.2 Firmware:
- Download the Jellybean 4.2.2 XXUBMEA Firmware Package and Odin from here to your computer. Once downloaded, extract both the files which you have downloaded in your computer. Open Odin in your computer.
- Turn Off your device so that it can be entered in the Download Mode. Download Mode in GALAXY S4 can be entered by first turning Off the device and then hold Volume Down Rocker Key + Menu Button and then Power ON the device. Once the device is booted and you see the Download Mode Green Robot, you can release the button combos.
- Connect your device to the computer with the help of original USB cable and then you will see that the ID : COM section will turn Yellow / Green, indicating that all the drivers are installed successfully.
- Click on “PDA” in odin to select the rooting tar file which will be there in the extracted folder to click on “Start” to start the process of rooting. Once the device is updated, the device will be rebooted automatically. It may take longer time than expected for booting the device. The whole process of firmware update might take anywhere between 10 -15 minutes depending upon various conditions.
- Don’t disconnect the device from computer till you see the home Lcd in your phone or the Language selection options.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome Lcd, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
Do let us know in the comments section just in case if you face any issues in the process of firmware update in the comments section as we will try our level best to sort out the same. For all those who wishes to root their Samsung Galaxy S4 GT I9500 smartphones, we will be coming out with a separate tutorial which will help you root the device.
Wednesday, September 10, 2014
JellyBean Rom For Galaxy Y GT S5360
Want to get Android 4.1 Jelly Bean taste on your Galaxy Y? Yes, of course you can. Find out details after the jump! TBefore you proceed, you will need to have fulfilled following requirements:
Step 2) Connect your Galaxy Y USB to your computer using the USB cable.
Step 3) Copy the downloaded file to your SD card.
Step 4) Turn off your phone and then turn it in again in the recovery mode by pressing and holding the Volume UP + Home Button + Power Key buttons.
Step 5) Now you will see exclamation mark on your phone Lcd. Again hold your volume up and power buttons. Now your Galaxy Y is in recovery mode.
Step 6) Once your smartphone is in ClockworkMod recovery, you are ready to perform a Nandroid backup of your existing ROM. For that you will need to select Backup and Restore option followed by selecting Backup again in next windows. Once the backup is completed, you are ready to go back to main recovery menu.
Step 7) Now you will need to wipe the previous ROM first. For that select Wipe data/factory reset option and select Yes to confirm the action.
Step 7) Now select Install zip from sdcard and then select choose zip from sdcard.
Step 8) Navigate to Custom ROM file we have just uploaded to SD card in step 3 and select it using power button. Confirm the installation on the next Lcd and the installation procedure should start now.
Step 9) Once installation is completed, go back to main recovery menu and select Reboot System Now.
Recommended: Before rebooting your phone from CWM Recovery, go to CWM Recovery main menu and select Wipe Data Cache under Advance option to perform the Data cache wiping.
- You have to install your Galaxy Y USB Drivers on your PC.
- You need to enable USB debugging mode which is deactivated by default.
- You smartphone should have minimum 80% charge remaining.
- Your Galaxy Y should be Rooted.
- This guide is only meant for Galaxy Y GT-S5360, dont try it on other variants of Galaxy Y. You can check your Galaxy Y version in Settings –> About phone.
- Last but not least, backup your important data like Call logs, SMS and other data in stored in phone memory so in case if anything goes wrong, your data is not hurt.
How to Install Android 4.1 Jelly Bean Custom ROM on Galaxy Y
Step 1) DOWNLOAD Android 4.1 Jelly Bean Custom ROM for Galaxy Y.Step 2) Connect your Galaxy Y USB to your computer using the USB cable.
Step 3) Copy the downloaded file to your SD card.
Step 4) Turn off your phone and then turn it in again in the recovery mode by pressing and holding the Volume UP + Home Button + Power Key buttons.
Step 5) Now you will see exclamation mark on your phone Lcd. Again hold your volume up and power buttons. Now your Galaxy Y is in recovery mode.
Step 6) Once your smartphone is in ClockworkMod recovery, you are ready to perform a Nandroid backup of your existing ROM. For that you will need to select Backup and Restore option followed by selecting Backup again in next windows. Once the backup is completed, you are ready to go back to main recovery menu.
Step 7) Now you will need to wipe the previous ROM first. For that select Wipe data/factory reset option and select Yes to confirm the action.
Step 8) Navigate to Custom ROM file we have just uploaded to SD card in step 3 and select it using power button. Confirm the installation on the next Lcd and the installation procedure should start now.
Step 9) Once installation is completed, go back to main recovery menu and select Reboot System Now.
Recommended: Before rebooting your phone from CWM Recovery, go to CWM Recovery main menu and select Wipe Data Cache under Advance option to perform the Data cache wiping.
Subscribe to:
Posts (Atom)
