Monday, November 3, 2014
How to Troubleshoot a Garmin nuvi 1100 1200 1300 or 1400 Series GPS
The Garmin nuvi 1100, 1200, 1300 and 1400 series of GPS devices make it easy to get from Point A to Point B -- when theyre working. When theyre not working, they can be the biggest obstacle in getting where you need to go. Use troubleshooting to work your way through a wide array of problems with your device so you can get back on the right track.
Garmin nuvi Doesnt Get a Signal
Your Garmin nuvi GPS can fail to pick up a satellite signal if youre currently inside of a metal building, a building with very thick walls or heavy insulation, or if youre surrounded by a lot of very tall buildings or trees. If your Garmin nuvi GPS loses a satellite signal, park your vehicle in an area away from these obstacles and wait for your device to pick up a signal, which may take a few minutes. If you still havent picked up a satellite signal on your device after a few minutes, restart your Garmin nuvi GPS while still stationary to see if that helps.
nuvi Doesnt Charge in Car
- The fuse in the power adapter that plugs in to a vehicles cigarette lighter may need to be replaced. You can replace the fuse by doing the following:
- Remove the fuse by removing the screw on the far end of the power adapter that plugs in to the cigarette lighter.
- Carefully tilt the part of the power adapter you removed the screw from into a cupped hand. A small silver tip piece and a small fuse will fall out. The fuse is a glass cylinder. The fuse number is located on the side of the power adapter.
- Insert a new replacement fuse in the power adapter and then slide the silver tip in behind it.
- Replace the screw on the end of the power adapter.
- Plug the device in and see if the Garmin nuvi GPS charges.
- Make sure your key is in a position in the ignition where the vehicles battery is turned on. If the battery isnt on, the Garmin nuvi GPS wont be able to charge.
- Make sure the temperature inside of the car is between 32 and 113 degrees Fahrenheit. The Garmin nuvi GPS cant charge in conditions that are too hot or too cold. Also, make sure the sun is not shining directly on the devices screen; this can also prevent your device from charging.
Computer Doesnt Detect Garmin nuvi GPS
If your Garmin nuvi GPS is turned on when you connect it to your computer, your computer may not recognize the device. Power down your Garmin nuvi GPS and then connect it to your computer. The computer will automatically detect the Garmin nuvi GPS and the device will boot up in USB Mass Storage mode. You can check that your computer is in USB Mass Storage mode by opening Windows Explorer. Your Garmin nuvi GPS will appear in the Devices With Removable Storage section. If after doing this your computer still doesnt recognize your Garmin nuvi GPS, try some of the tips outlined in the following article:How to Troubleshoot Windows 7 USB Problems. The article focuses on Windows 7, but similar approaches also work to troubleshoot issues with Windows Vista and Windows XP USB ports.
Garmin nuvi GPS Doesnt Respond to Touch
Restart your device. If that doesnt work, try recalibrating it. You can recalibrate your Garmin nuvi GPS by doing the following:
- Power down your Garmin nuvi GPS.
- Press and hold your finger against the upper-left corner of your Garmin nuvi GPS touchscreen. Press the "Power" button to turn on your device and continue holding the Power button down as the device boots up until the Garmin screen appears and then release the Power button.
- Continue pressing your other finger against the upper-left corner of the Garmin nuvi GPS touchscreen until a white dot appears in the center of your devices touchscreen that says "Press dot."
- Remove your finger from the upper-left corner of the screen.
- Press as close to the center of the dot with the finger you use most to touch commands on the touchscreen to calibrate the device. The device will continue booting up and the touchscreen should be responsive when you touch commands.
Phone Wont Connect to Garmin nuvi GPS
Your Garmin nuvi GPS may not have a Bluetooth option. Touch "Tools" on your Garmin nuvi GPS home screen and then touch "Settings." If you have a Bluetooth option, your device has Bluetooth. If you have a Bluetooth option, tap it and then tap to enable Bluetooth. Also, make sure your phone is within 35 feet of the Garmin nuvi GPS, as your phone wont work outside of this range.
How Do I Quickly Delete My Personal Data?
You can quickly remove all of your personal data, such as your favorites and destinations, from the Garmin nuvi GPS by pressing a finger against the lower-right corner of your devices home screen while the device is powering up. A dialog box appears asking if you want to clear all of your user data. Press "Yes." The amount of time it takes to complete the process depends on how much personal data is on the Garmin nuvi GPS. After your personal data is removed from the Garmin nuvi GPS, the device will boot up normally. Doing this restores the devices original settings and removes any information youve saved to the device, such as destinations and favorites.
nuvi Doesnt Stick to Windshield
- Clean the part of the windshield where youre trying to stick the Garmin nuvi GPS with soap and water to remove any dirt from the area.
- Rub rubbing alcohol on the part of the windshield where you want to stick the Garmin nuvi GPS and then wipe it off using a soft silk cloth.
- Rub rubbing alcohol on the bottom of the suction cup that attaches to the back of the Garmin nuvi GPS and then wipe it off using a soft silk cloth.
- Place the suction cup against where you want to stick it on your windshield and then press the suction cup against the windshield.
Wednesday, October 29, 2014
How to Nokia Master Reset or Hard Reset a Nokia N96
Nokia N96 Hard Reset, Nokia N96 Master Reset Nokia N96 reset
To perform a master reset or hard reset on your Nokia N96 you will need to:
dial *#7780# or *#7370#
enter your security code (default is 12345)
Nokia 6700 slide Navigation and Upper Key Not Working or Responding solution
If encountered this problem the solution below will tell us which particular parts or components that might damaged and caused the problem.
In Nokia 6700 slide the upper keys like the soft left, soft right, up, down, select, right, left, send, menu, S60 and the power ON OFF key is mounted or connected on a flexible cable wire.
This solution below shows the upper keys connection with each other keys.
Once the flexible cable wire damaged or breakdown all of these connected circuit will show some difficulty and problem.
A damaged flex can be checked visually for looking some cuts or brushes but sometimes not so easy to determine.
Now if the flex cable wire is already been replaced but still does not solved and fix the problem, you can proceed and see this soltion below for further troubleshooting.
Now, this solution shows the location of the two ESD-EMI filter used on nokia 6700 slide keypad circuit.
This filter ICs also holds the numeric keys, if one or both of these keypad filter IC is damaged this will result to keypad not responding problem.
